Artikel Nr |
Beschreibung |
Description |
Inhalt |
Part # |
Qty |
106-115 |
Servobefestigungsplättchen |
Servo Hold Down |
5 |
106-120 |
Distanzscheibe f. Hauptrotorwelle |
Main Shaft Shim |
4 |
106-301 |
3mm Distanzscheibe |
3mm Bolt Shim |
5 |
106-305 |
Motordistanzplättchen 0.5mm |
Engine 0.5mm Shim |
2 |
106-310 |
Motordistanzplättchen 1.0mm |
Engine 1.0mm Shim |
2 |
106-315 |
Motordistanzplättchen 1.5mm |
Engine 1.5mm Shim |
2 |
106-326 |
5.5x26 Abstandshalter m. Gewinde |
5.5x26 threaded Hex Stand off |
2 |
106-326A |
5.5x26 Abstandshalter o. Gewinde |
5.5x26 Hex Stand off, no threads |
2 |
106-401 |
4mm Distanzscheibe |
4mm Bolt Shim |
2 |
106-601 |
6mm Distanzscheibe Heckrotorwelle |
6mm Tail Shim |
4 |
106-801 |
Distanzscheibe 0.5mm |
Head Shim 0.5mm |
2 |
106-802 |
Distanzscheibe 0.75mm |
Head Shim 0.75mm |
2 |
106-803 |
Distanzscheibe 8x1.0mm |
Washer, 8x1.0mm |
2 |
106-806 |
O-Ring Neopren HR:70~80 |
Head O-rings Neoprene HR:70~80 |
2 |
106-807 |
Tankscheuerschutz |
Fuel Tank Edge Grommet |
2 |
106-808 |
HS O-Ring |
Tourque Tube O-rings |
2 |
106-810 |
Gummitülle Tank |
Fuel Tank Stopper Grommet |
1 |
106-813 |
Sicherungsring Hecksteuerhülse |
Tail Pitch Slider Lock Ring |
1 |
106-900 |
Hauptrotorkopfmitnehmerstift |
Jesus Pin |
1 |
106-910 |
Sicherungsstift |
Tail Drive Shaft Roll Pin |
2 |
106-920 |
2mm Sicherungsclip |
2mm pin clips |
4 |
106-921 |
Gelenkstift Hecksteuerbrücke |
Tail Pitch Link Pin |
2 |
106-922 |
2mm Gelenkstift Pitchkomp.Arm |
2mm washout pins |
2 |
106-923 |
2.4mm Stift Heckrotorgetriebe |
2.4mm Tail gear pin |
2 |
106-925 |
2.5x32, Pitchkompensatormitnehmerstift |
2.5x32 Antirotation pin |
2 |
106-930 |
M3 Beilagscheibe |
M3 Step Washer |
2 |
106-952 |
Halter für Drehzahlregler Sensor |
Governor Sensor Mount, molded |
1 |
106-955 |
Start Adapter |
Hex Starter Adaptor |
1 |
106-965 |
Schubstangenscheuerschutz |
Tail push rod sleeve |
2 |